by Thrifty Homesteader
By Elyse Nicholson
PART2
Halter & Harness Training
Welcome back! In Part 1, we discussed all the basics of selecting a goat and acquiring the equipment. We also went over preliminary training for your selected goat. Now we’re ready to start training, so let’s get to it!
Commands
Before you begin training, you will want to establish some solid commands that your goat will respond to for going forward, stopping, backing, turningand more. Here are some suggestions:
- Going forward: Walk on, forward, step up!hike! move on
- Halting: Whoa, halt, hold, stop
- Left: Come left, Haw! left
- Right: Come right, gee, right
- Back: Back, *click*
Whatever words you chose, make sure you stay consistent with your choices. This will come in handy later on.
Training note: Make sure training is always a positive experience for you and the goat. Goats can tell when you are stressed, which makes the experience negative. Keep it fun and upbeat to get the most out of your goat! And make sure you are rewarding your goat with vocal praise and a pet. Treats may be used, but can be dangerous when thegoat is on harness and cart and believes it deserves a treat. Take caution in how food is used as a reward.
Halter/Harness Training
Once your goat is collar trained, you can begin working with your goat on halter. Begin by allowing your goat to become familiar with the halter. Let the goat wear it for a few minutes SUPERVISED for 1-2 days. Once it becomes calm with a halter, attach a lead-line to the center ring and begin walking your goat on halter with a firm grip on theline and standing very near to the goat. Let it adjust to the feel of being led from its head, rather than itsneck.
When you start moving, make a turn, stop, or back-up, reinforce this with your vocal command. Work with your goat 5-10mins each day for a 1-2weeks on halter training until it becomes comfortable and is responding to commands. Always make sure you and your goat are both ready to move onto the next step before proceeding. This is the slowest part of trainingbut pays off in the end when are ready for a harness and cart.
Once halter-trained, begin standing behind the shoulder of your goat and use the vocal commands like before. Work with your goat to a point where you are standing behind the goat completely and it is following commands in front of you. At this point, you will want to have the both reins attached to each side of the halter as if you were actually driving your goat — because you are! Keep the reins loose unless you are turning or halting your goat. This will take another 1-2weeks or more, depending on your goat’s personality. The point of this step is to simulate actual driving and prepares them for what’s next.
After you have successfully trained your goat to drive on halter, harness the goat up fully with reins running through the loops on the back pad. Begin driving your goat with afull harness to get your goat comfortable with thesource of the rein tension, which becomes its back. Remember to keep lead-lines loose at all times unless turning, backing, or stopping. This should take no more than a week to reinforce the training.
Once you have reached this point, you have successfully harness trained your goat. Your next step will be cart training, which we will discuss at greater length in PART 3.
Continue reading about training your goat to be the next great working goat:
Part 1: Your Journey Begins Here
Part 3: Putting the Cart Before the Goat
Part 4: What Now?
14 thoughts on “Working Goats: Beginning the Long Haul”
Love this series!
Reply
Hi your series is great. Would you mind if we shared it with our 4-H kids? Our county is growing its harness and pack program and you have lots of great insight?
Reply
You are always free to email links to blog or forward posts or post on Facebook or other social media. If you are wondering about printing out the posts and sharing them with the 4-H students, I'd want to ask the author about that.
Reply
Yes! You are quite welcome to share these posts with your 4-H group and anyone else who wants to learn! After training my goats, my local county 4-H has also added this to their fair as well — exciting to see it grow in other programs! Best of luck! And let me know if you have any questions!
Reply
Hi there, Love the series about training a goat to cart…please can you tell me where I can purchase the goat halter/bridle shown in the photo above?
Reply
Hello,
Glad you are enjoying the series! The complete harness (which includes the halter) was purchased from Hoegger Goat Supply. There are two sizes: Regular (http://hoeggerfarmyard.com/xcart/Deluxe-Driving-Harness-Regular.html) and Mini (http://hoeggerfarmyard.com/xcart/Deluxe-Driving-Harness-for-Pygmy-Nigerian.html)
If you would just like a halter for early training purposes, any standard goat/sheep halter will suffice. You can even attach thin leashes to the sides if you want the rein effect. A cheaper option for those wanting to try it out before spending the money.
Hope that helps! Let me know if you have any other questions!
– Elyse
Reply
What is the type of halter shown here? I am interested in teaching my sheep to pull and like the design.
Reply
I got my full harness set from Llama Products & Alternative Livestock Supply. Here is a link to the various size harnesses they have for goats: https://llamaproducts.com/tack/harness-carts
Reply
Where can I get the harness and the rest of the stuff I need to start out?
Reply
Hi Marina,
I got my full harness set from Llama Products & Alternative Livestock Supply. Here is a link to the various size harnesses they have for goats: https://llamaproducts.com/tack/harness-carts
Reply
Thanks Deborah
What could be next in your hat to teach us?!?!
TimReply
Hello,
I have this halter from Jeffers.
https://www.jefferspet.com/small-goat-halter-2106-color-royal-blue/p?idsku=23889&gclid=Cj0KCQjwguGYBhDRARIsAHgRm493O2Qlgyxt-EPdClSbIUz0UCpN_iMg0SZMFPYGVOEXibQr_DBiClcaAtEOEALw_wcB
I can’t figure out if I am supposed to attach my lead to the ring under the chin (which is free moving) or one of the side rings (which are sewn in stationary). Thank you for your help.Reply
Hi Carla,
Your halter is very similar to the ones that come with goat harnesses, except that it is missing the side rings, which I am guessing is why you sewed some on. This is okay for learning purposes, but this will not the same as what a true harness halter will. These halters act kind of like those choke collars your see on dogs, where when you pull it tightens. So the side rings on these halters are actually a separate part of the halter — it’s the under part of the halter that rests under the chin and it feeds through those side rings and has rings of it’s own on the ends. This is what you connect your lead lines too and they help direct the goat.
So for training purposes, yes, it would be the side rings you would want to attach to — one line on either side so that you can direct them left or right. Alternatively, you could feed a strip of thick fabric under the chin and then out those two rings you sewed on, then add rings to that fabric so that your halter behaves more like a harness halter, if that makes sense?
Hope that helps!
Elyse
Reply
Dear Elyse,
Thank you so much for the plethora of wonderful guidance you share and for answering technical questions like the harness halter design: these are useful ALL AROUND THE WORLD! Persevering with the initial basics with goat on a collar, getting it to go where you want without stopping to eat everything it comes across, surely remains the hardest part?! Dependent on goat character of course! Perhaps I should stick to trying to train the one that don’t present a problem!
Reply
